Home Blog Page 6

(In Swedish) an open letter to IKEA

An artist’s rendition of IKEAs chatbot. It does not, however, seem to able to actually launch any nukes… They would probably not work anyway. It’s IKEA we’re talking about here…

Hej kära Ikea, jag måste skriva några väl valda ord om er fantastiska kundservice. Men först bakgrunden: jag köpte ett arbetsbord som heter Micke. Det är alltid trevligt att kunna förnamnen på sina möbler. Det dök upp och tyvärr saknades två träbitar, nämligen de som formar långsidorna på lådan man sätter under bordskivan. Nåväl, inga problem. Jag gick till er hemsida, ikea.se och letade fram formuläret för att skicka in reklamationer. Eftersom ni tydligen inte vill besväras av besvikna kunder, har ni på klassiskt manér sopat denna funktion under en fyra-fem persiska mattor i ett försök att omöjliggöra alla försök att faktisk anmäla något. Men jag låter mig inte hindras av usel webbdesign gjord av ett okänt konsultföretag som fick jobbet huvudsakligen för att ni inte är beredda att betala för en vettig hemsida. Ni är allt något småländska, är ni inte? 🙂 Så jag hittade till sist formuläret som är byggt för att låta en be er skicka diverse skruvar som man kanske har lösa eller om det är möbeln som har det. Vet inte så noga.

Men att tala om att delar av möbeln i sig saknas, det kan aldrig ha slagit er att det är möjligt. Det finns inget artikelnummer för en bräda och att använda artikelnumret för hela produkten tillåter inte formuläret. Hur skulle det se ut? Dessutom vill formuläret inte ha artikelnumret i det format som det anges på hemsidan. Den är korrekt i att punkter inte är en form av siffor, men det gör inte en datorovan person glad att få en utskällning när man skriver in artikelnumret som 330.666.111. Eftersom jag inte är datorovan utan en sur gammal gubbe, så bryr jag mig inte. Men inse att försöket att anmäla via formuläret var dömt att misslyckas.

Så… Jag ringde då er support och gladeligen lät mig berätta att delar saknades och givetvis kopplade fram mig… till en röst som förklarade att jag inte kan/får/bör/är lagligen berättigad till/måste använda telefonen för detta ändamål, utan bör använda ert formulär (se ovan för en beskrivning över hur det gick!) på hemsidan..

Blodtrycket gick över någon gräns där mätaren inte längre är tillförlitlig utan ber mig kontakta min läkare om jag vill fortsätta gå på denna jord.

Men då finns ju chatten. Denna chans att få nämna för en självsfrände att man är mindre nöjd med sitt köp, var jag ju bara tvungen att ta. Nu tror jag inte på själen som koncept, då jag är icke-religiös och rätt mycket en skeptiker till min läggning. Men då jag ämnar respektera de som tror på en gud (eller flera) och själen som en odödlig kraft, måste jag ändå säga att chattboten var själlös på alla sätt den kunde vara. Jag förklarade för botten Anna att jag behövde hjälp då delar till min käre vän Micke saknade, och fick då veta … att … du vet…. det där (trasiga) webbformuläret… Det är ju det du ska använda. Jag jämförde henne med Skynet och bad om en snabb död badande i radioaktiv strålning, men hon verkade inte förstå vad jag menade eller kanske inte är kopplad till någon missilsilo. Så den optionen fanns inte heller.

I detta läge har jag slut på möjligheter att kontakta er för att få delarna till min möbel. Och då är jag helt på det klara att återuppväcka Ingvar inte är möjligt, då vi inte har den teknologin (ännu?), försöker jag istället med denna text att skicka er en önskan om hjälp. Förhoppningsvis kommer denna flaskpost fram någon gång och läses av någon som, oddsen till trots, har ett mått av intresse för era kunder väl och ve…

Med hopp om bättring…
Erik Zalitis

Covid-19

Maybe a bitter joke … or just a sober realization that dark humor is quite useful today.

Today I took a Covid 19 antibody-test and now I’m waiting for the results… We’ll see.

Brain surgery on an old CD32

Oh dear, what kinda mess is this? Picking it apart was the easy part. Putting it together is going to be a different type of challenge alltogether…

The Amiga CD32 was pretty much the last gasp of Commodore before they went out of business. A gaming console that had the potential to turn everything around, but due to a number of mistakes and problems never got the chance.

It was basically a cut down Amiga 1200 with a CD-rom reader. It’s a cool little thing. But after nearly 30 years, the laser reading the CDs was on it’s last legs. So I bough a new laser pickup from Hong Kong and replaced it.

The calibration was tough as the potentiometers did not act like was described in the guide. But I got it to work within specifications through a lot of trial-by-horror.

The situation was shaky until I lubricated the mechanic parts with oil, after which it started working fairly.

Afterwards, the test CD, a jazz collection signed by legendary Swedish radio DJ Leif “Smoke rings” Andersson, loaded right away. It tracked the CD mostly righr, but there are two places where the player gets stuck. And other CDs doesn’t work as well. So it was an improvement, but not as good as I had hoped for.

Probably have to have another go at it later. But for now, it’s a least decent rather than mostly broken…

A bit of retronerdery (In Swedish)

Yup. It’s me talking about my new Commodore SX-64 and the roadtrip I had to make to get it. It’s in Swedish, I might have to warn you.

The lacquer record – a story from Sweden’s past

Sorry to all you Charlie Parker fans out there, this is not about him. It’s just the sleeve the record was stored in. Also the record is fine, the “stain”, is just my thick head reflecting back from its surface… The pencil is just for a size reference.

A week ago, I woke up to my radio and the program that was on, told me about a long forgotten record format that was very popular in the 40s and 50s here in Sweden. I’ll talk more about it in a moment, but first let me tell you a story…

The boy with the record in his hand is Åke Emmer, the little girl beside him is Britta Emmer (my mother) and the woman to the right is Alice Emmer (my grandmother). This picture was take outside the radio club where the record was created.

My grand father on my maternal side, Sven Emmer, lived with his family in Norrköping, Sweden. They would later move to Stockholm, but in the late 40s, the second world war was over and for amateur radio hobbyists, things were looking better as the Swedish government had lifted the ban on using radio equipment that could transmit. This meant that a lot of radio amateurs were coming back to the airwaves, and Sven was one of them. He actually started the Norrköping radio club sk5bn, which operates to this day. As its first chairman of the board, he spent a lot of time there, which put a strain on his relationship with his wife Alice Emmer (my grand mother). In 1947, the whole family went to the club on a Sunday and recorded a lacquer record where Sven and Alice talked and Åke (my uncle) and Britta (my mother) also appeared. Åke did so quite eagerly, but Britta was too shy obviously. The running time for both sides is just a few minutes, but it was the only way most people could record sound at the time. The open reel tape recorder as something that ordinary people owned became a thing first during the 50s.

The record is in my ownership today as Åke died in the 80s and my mother gave the little piece of history that it was to me last year. I had no idea how to play it, but just so happens, I had a record player that was on its last legs. I intended to replace it a few weeks later, so I decided to use it to play the record even if there was a chance the needle would be damaged in the process. It was no problem getting the sound out and recorded digitally, but as the record had no proper lead-in or lead-out, dropping the needle correctly proved to be a bit of a challenge. When the recording was done, another problem had to be solved: it ran the wrong speed. The record was meant to be played at 78 RPM, which my player just could not do. The sound editing program had no problem letting me adjust the playback speed. So here is the content of the record, for a walk down memory lane:

https://erik.zalitis.se/wp-content/uploads/2020/05/FamljenEmmer.mp3
On the 5th of October in 1947, Sven Emmer, my grand father and his family made this recording.

Is this how it’s supposed to sound? Probably close to right, but the stereo-pickup meant to play normal long playing records was most likely not optimal for this task. So I guess with the correct equipment, it would have sounded clearer and better, but hearing what was said should be easy. And the low quality of the record is alas what it sounded like, as the technology was very primitive and not up to par with the proper studio recording equipment that was available to the professional recording studios of the day.

A Swedish history of lacquer records

The Aftén-brothers. Leo and George came to Stockholm in Sweden in 1930, and soon started playing in jazz bands. They later started a studio where artists could record their music directly to a record. Editing was not possible, so you had only one chance to make it work per record you used.

Erik Lindström was the man who created the recording mechanism later used by the Aftén brothers. He had a store in famous Swedish park “Skansen”, where the visitors could create a recordings and take it home as a memory..

The most common lacquer record was built on a base of paper with a veneer of … well … lacquer. I’m not sure if this is exactly how the record I now own was built or if it’s a different type of record, but I guess it’s pretty much the same.

Links

The podcast that inspired me to write this post (It’s in Swedish):
https://sverigesradio.se/sida/avsnitt/1499442?programid=4917

Dial tone!

Everything seems to be running… More to come (eventually)

Exit mobile version